whirlpoo; wfw9200 F22, F28, A17 A27 error codes 6 month old whirlpoo; wfw9200 with these F22, F28, A17 A27 error codes f22 is a door lock error and f28 is a commication error you still have warranty ...
code f28 Hi, the error code F28 means one or both of these parts are bad. Motor Control Unit (8540135) Microcomputer Machine Control Unit (8540788) It would be a good idea to order both, as both ...
...code F28 flashes when machine stops http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3708-whirlpool-washing-machine-fault-codes.html Not good! Probably motor control board or motor ...
...F28 code. I unplugged it for 5 minutes and it still will not run a cycle without stopping with a flashing F28 code. The error code F28 means one or both of these parts are bad. Motor Control Unit ...
f28 error code and door lock light When starting unit, door lock latches but door lock light does not go on and washer sits and does nothing. Eventually it powers down and door lock relay unlocks door
...F28 code. What is that? it gives a F28 code. What is that? F28 is a motor controller error... Try unplugging the machine for a minute or two, then starting it again. If no good, you can remove the ...
...F28 code. Hi This code indicates an electronics communication problem with the washer.Please check this link to get a detailed idea related to the lists of codes and the resolutions to them:- ...
...F28 error code means - SERIAL COMMUNICATIONS ERROR/MOTOR CONTROL UNIT ERROR. Caused by either a communications problem between the Central Control Unit and Motor Control Unit, or Motor Control Unit ...
344 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions