Belkin F1DG102U 2-port KVM Switch "computers" Questions

how to connect 2 computers to a dlink 4 port kvm switch? The unit comes with all the cables in order to connect up to four computers to one KVM switch. If you're only using two computers, then you'll ...

computers will not switch over it has been some time since i used this particular kvm. one thing is true about all kvm's, you must boot each computer one at a time and each computer must be active on ...

I do not recommend it since more problems could occur. If you have the PS2 ends first shutdown both computers. remove your monitor, mouse, and keyboard from your computer and attach them to the single

When I enter BIOS on one computer, no keyboard. The other computer is OK Otherwise both computers work fine in all modes. Only when in BIOS on computer number one. Hello there: first try this boot the

don't get video here, then it is a seperate issue with that PC. If Computer 2 is working, plug both computers into the KVM but switch the cables (plug Computer 1 into the KVM using Computer 2's cables

sometimes one of my computers *always same one) doesn't recognize the mouse and keyboard. This is a common problem with KVM switches. To isolate the problem, here's what you need to do: 1. First, ...

my computers seem to have become somehow linked by the KVM switch I use a Iogear KVM between my two towers one is XP and One Vista .. it worked fine for a long while then suddenly began diplaying odd ...

...and I love the unit except for the fact that the keyboardfunction won't work on one of my computers. This computer has WindowsVista Home Premium Edition installed, and the other one has ...

I just buy a new computer and go to hook up my KVM switch that I was previously using and was working flawlessly. All cables are connected (KVM PS2) except the KVM video cable to computer # 2. So I'm ...

...I see the desktop again, it is still my old computer. On that model of KVM switch,making sure Both computers are on, you should only have to hit the "Scroll Lock" key twice, then hit the up arrow to ...