IOGear MiniView GCS62 2-port KVM Switch Logo
Posted on May 14, 2010

AN IT person set up my computer so that I could switch back and forth between the old and new computer (Win 7). I click "Menu", Click the > arrow 6 times to select the appropriate bos, I then select "Input Source", CLick "Menu" so that the dot turns grey on my D-Sub computer, I then click the > arrow to select "DVI-D", my new computer. THe screen fades, but when I see the desktop again, it is still my old computer.

1 Answer

drobertson42

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Welcome Back:

Visited the website for 2 consecutive days.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 6 Answers
  • Posted on Sep 08, 2010
drobertson42
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Welcome Back:

Visited the website for 2 consecutive days.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 06, 2010
Answers
6
Questions
0
Helped
1751
Points
8

On that model of KVM switch,making sure Both computers are on, you should only have to hit the "Scroll Lock" key twice, then hit the up arrow to switch between computers. like "tap-tap" on Scroll Lock key then "tap" on the up arrow key. See if that works.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Driver for Pioneer DVD-RW DVR-K16D

Suggest you try this, Chris;

Go to Device Manager.

[WinXP:
Start > Right-click on My Computer > Left-click on Properties at the bottom of the list > Left-click on the Hardware tab. Left-click on Device Manager

Win Vista/ Win 7:
Windows logo button > Right-click on Computer > follow the above ]

When Device Manager loads click on the + sign, to the left of DVD/CD-ROM drives.
Right-click right on the name of the optical drive. (CD/DVD drive)

Left-click on Uninstall.

A Microsoft 'squawk box' will come up; "Warning you are about to uninstall this device"
It's OK. Click on OK.

Now close all windows, go back to your desktop screen.
Restart your computer.

(WinXP: Start > Turn Off Computer > Restart
Win Vista/Win 7: Windows logo button > Restart )

When Windows fully loads you will get a pop-up, out of the system tray, "Found new hardware device", and perhaps another one, "Found Pioneer DVD-RW"

Windows has the habit of losing drivers. Let's see if this 'slaps Windows around'.

Regards,
joecoolvette

[Driver: Small piece of software that allows the Operating System to communicate with a device.

Windows XP/Vista/7 is the O/S, the optical drive is the device ]
tip

Windows 7 Tips and Hacks

You have upgraded to Windows 7, love the new taskbar, and enjoy the power of using the cool Libraries feature. But now you want more. You want the cool tips and tricks that make Windows 7 fun! So here are the best ones to help you get the most out of your new OS. We will focus on the Windows 7 interface to get you started on the road to becoming a Windows 7 Power User.

1. Use Keyboard Shortcuts Using the mouse, you can drag-‘n-dock windows to either side of the screen, or drag it to the top to maximize it. These keyboard shortcuts are even faster:
  • Win+Left Arrow and Win+Right Arrow dock the window to the left and right side of the screen
  • Win+Up Arrow and Win+Down Arrow maximize and restore/minimize
  • Win+M minimizes everything
  • Alt+Up, Alt+Left Arrow, Alt+Right Arrow navigate to parent folder, or browse Back and Forward through folders in Explorer
  • Win+Home minimizes/restores all open windows except the active window
  • Alt+Win+# accesses the Jump List of program number ‘#’ on the taskbar

2.Rearrange System Tray Icons
You can rearrange icons on the taskbar as you wish and start new (or switch to running) instances of the first ten taskbar programs using Win+1, Win+2, and so on. The cool thing is you can also rearrange system tray icons. Reorder them on the tray or move them outside or back in the tray. Take control of what you want to always keep an eye on, and from which apps you’ll require notifications.


3. Access Jump Lists with the Left Mouse Button Jump Lists usually show up when you right-click on a taskbar icon. However, they can also be accessed by holding the left mouse button and dragging upwards. If you’re using a laptop touchpad or a touch screen, this is convenient because you do not have to click any button to access a context menu.


4. Add Any Folder to FavoritesYou can add any library or folder to the Favorites section in Windows Explorer. To add a folder, navigate to it in Explorer, right-click Favorites in the left navigation pane, and select Add current location to Favorites. Now you get quick access to your favorite folders in all File->Save As dialogs!


5. Pin Frequently Used Folders to the Taskbar Right-click, drag, and pin your favorite folders to Windows Explorer on the taskbar. They will now show up in the Jump List when you right click on Explorer giving you quick access to your favorite folders.


6. Pin Control Panel to the TaskbarYou cannot pin the Control Panel to the taskbar via the Start Menu or by drag and drop. Open the Control Panel and right-click its taskbar icon to pin it to the taskbar. An advantage of this is that Control Panel’s Jump List allows quick access to recently used functions.


7. Create Keyboard Shortcuts for Programs You can create keyboard shortcuts for any program in Windows 7. Right-click the program icon and select Properties. Select the Shortcut tab, click in Shortcut key, to set the keyboard shortcut for that program.


8. Open Command Prompt in Any Folder Like the command prompt? Miss the ‘Open Command Window Here’ Windows XP power toy? Press ‘Shift’ when right-clicking on a folder to get that option in the context menu. This also works on the desktop. No power toy required!


9. View Expanded ‘Send To’ MenuPress Shift when right-clicking on a folder to get an expanded Send To menu.


10. Adjust Screen Text with Clear Type Use Clear Type Tuner for the best look on your LCD monitor or laptop screen. Run ‘cttune.exe’ from the Start Menu search box, or go to the Control Panel Display applet, and select Adjust ClearType Text from the left.


11. Get Exact Colors On Your Screen If you are an artist or you work with colors, use the Calibrate Color option in the Control Panel Display applet or run dccw.exe from the Start Menu search box. You can adjust gamma, brightness, contrast, and color balance, ensuring that colors are displayed correctly on your screen.

12. Customize the Power Button If you restart your computer more often than you shut it down, change the default Shutdown power button to Restart. Right-click on Start, select Properties, and choose the Power button action that you use the most.

13. Customize Number of Items in Jump Lists & Start Menu google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);Right-click Start, select Properties, click Customize and choose the number of recent programs to be shown in the Start Menu and the number of items displayed in Jump Lists from the Start Menu Size section below.

14. Search Internet from the Start MenuEnable Internet search from the Start Menu using your default browser. Run GPEDIT.MSC from the Start Menu search box to start the Group Policy Editor. In the left pane, go to User Configuration->Administrative Templates->Start Menu and Taskbar. In the right pane, right-click to Edit and Enable Add Search Internet link to Start Menu.


15. Add Videos to Start Menu Windows 7 does not place a link to your videos on the Start Menu by default. To add a link to your videos on the Start Menu, right-click Start, select Properties, click on Customize. In the Videos section at the bottom, choose Display as a link.





on Jan 19, 2010 • Computers & Internet
0helpful
1answer

Connecting HP printer to laptop

1) Printer NOT Connected to laptop.

2) Grab the Installation Disk that came with the printer. Put it in the CD/DVD drive tray.

3) Load ALL software. If there is a full feature version, install it.

4) Close all windows when finished. Restart your computer.
(WinXP: Click on Start > Turn Off Computer > Restart
Win Vista and Win 7: Click on the Windows logo button, (Start), then in the side flyout menu, click on the small Down Arrow.
Now click on Restart )

5) Printer plugged into power, NOT turned on. Plug the USB cable from the printer to the computer. Turn the printer on.
In the taskbar at the bottom of your Windows screen, you should see,
"Found new hardware", and possibly a second pop-up,
"Found HP XXXXXX printer"

Post back in a Comment for additional questions.
Regards,
joecoolvette

[ IF, you have already plugged the printer into the computer, and turned on, plus afterwards installed the HP printer software, post back in a Comment.
There is a different method to use now ]
4helpful
1answer

Lexmark z600 for windows 7

Use the Lexmark Z600 Series Vista driver in Windows 7. First, check if your Windows 7 is running on 32-bit or 64-bit operating system. From your computer, go to Start menu > Programs > right-click on Computer > click on Properties. Take note of the System Type.
Use the link below to download and install the printer driver on your computer:- Lexmark Z600 Series Driver for Microsoft Windows Vista / Win 7 32-bit- Lexmark Z600 Series Driver for Microsoft Windows Vista / Win 7 64-bit

Simply follow the instructions on your computer screen to complete the installation.
0helpful
1answer

The display only about 5"

Hi there,

Try changing the screen resolution your display screen might be having trouble supporting the resolution you are currently using. If this does not work try updating the video driver for your computer.

To change the screen resolution:

Win XP:

Right click on the desktop -> Choose PROPERTIES -> Click the SETTINGS tab and change the resolution click apply and then ok

Win Vista:

Right click Desktop -> Choose Personalize -> Change the screen resolution click apply and ok

Win 7:

Right click the Desktop -> Choose Screen Resolution -> change it and click apply and ok


If the above steps does not work try going to the sony vaio support site and download the updated driver for your Video Display.

Hope this helps!
1helpful
1answer

During boot up of my dell studio 1537 laptop it just keep repeating the dell studio load screen

If PC is not going further Dell logo screen then most of the time its a hardware issue. You can try only to steps to fix this issue easily.

1.Ran a diagnostic of dell by Cd
insert your dell drivers and utilities disk into your drive>>turn off the comp>>restart the comp by pressing F12 key>>you will boot menu now>>choose the option boot to utility partition>>hit enter>now it will show you 3 test> choose Express test and hit enter>>now it will start checking your hardware component of your computer

2.If hardware diagnostic pass then you can try dell factory rectory restore.

if you have xp they try this:-
1.Turn off the computer>>restart the pc by pressing alt+f11 again and again>>now you will get the dell factory restore wizard and follow the on screen instruction. sometime it does not show you the dell factory Restore screen in case if it is damage or corrupted.
hat screen if

If you are using Vista or window 7 then follow this:-

  1. Restart the computer. To do this, click Start, click the arrow next to the Lock button, and then click Restart.
  2. As the computer restarts, press the F8 key until the Advanced Boot Options menu appears on the screen.
  3. Press the downarrow.jpg(Down Arrow) to select Repair Your Computer on the Advanced Boot Options menu, and then press Enter.
  4. Specify the language settings that you want, and then click Next.
  5. Log in as a user who has administrative credentials, and then click OK.
  6. Now you will get Recovery Tool so here Choose the last option dell emergency backup/factory restore
7.Hit enter and next and next and enter your personal information like country, user name, language etc....and finally you will get you desktop welcome screen.

cheers!

Let me know was this helpful.
0helpful
2answers

How to change my wallpaper ?

Windows 7 --> At dekstop front page, Right click >Personalize > Click Dekstop Background > Choose pivture > Save

Windows XP --> At dekstop front page, Right click > Properties > Dekstop Wallpaper > Browse your picture file > OK

or just open Windows Explorer > Open Folder where you save the picture file > Click file > Right Click > Set as Dekstop background > DONE

Hope this help and if this helpful RATE please.
0helpful
1answer

The printer keeps going offline. I try to change the setting and turning the printer off, turning the computer off but nothing works.

Solution 1 On the Computer:
Click Start and then go to Printers and Faxes (XP), Printers(Vista), Devices and Printers(Win 7)
1. Right Click on your printer Icon 2. Click Open or See What's Printing 3. Click the option that says Printer on the upper left corner of the window that pops up. 4. Make sure the only thing that is checked under that menu is Set As Default Printer. 5. If Use Printer Offline or Pause Printing has a check mark. Uncheck it.

Solution2 On the Printer:
>Go to Set-up >Go to Network Set-Up >Choose Restore Network Defaults >GO Back and then Choose WIreless Set-Up WIzard




Try printing again. I hope this helped.
0helpful
1answer

Incompatible with windows 7 home premium

Go to this website:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4600#DriversAndSoftware

Select your operating system in the pull down menu either Win 7 or Win 7 for 64 bit.
( If you do not know which Op system you have, Click on Start>Right click on Computer>Click on Properties>view the info on your computer)

Please follow these instructions to download and install a new driver:
---------------------------------------------------------------------------------------------------------------------------------------
Please read all instructions before you begin.

I'm going to tell you how to download a new driver. Before downloading anything from the internet, be sure that your virus control is up to date. If you are not sure, click on the icon now and open it up and find "update" and click on it and allow it to update from the internet.
>Go to website above
>Click on the correct Driver and proceed with the download.
>When asked ,save or run ,choose SAVE, then browse to your Desktop and save the file there.
>When your download is complete, follow these steps:
>Close the Canon site.
>Go to Start>Control Panel>Install / Uninstall>browse the list for your old printer driver and click on it to uninstall.
>Turn off your printer and unplug it from the PC
To install the new driver:
>Turn off any running programs> check in your lower lefthand taskbar for icons and if possible pause them for a few minutes, including the internet and your virus control(in that order).
>Double click on the new driver file that you just downloaded to your desktop
>It will install and may give you instructions. Just follow them and allow it to install. You may need to restart the computer to fully install it.
>If you have not been instructed to do so, you may now plug the printer back into the computer and turn it on.
>Turn your virus control back on before you turn your internet back on(!)
>Try a print. Do not delete the driver file off your desktop until you are sure the printer is working.

Note: Occasionally a download will be corrupted. If you are not successful the first time try a new download. It is important to install new software in as CLEAN of an environment as you can ( No programs running)

Please let me know if this works for you and rate my answer. Thank you!
0helpful
1answer

Cant open windows, have got following error code; Oxc0150002 i want to restore factory settings how can i do this?

Hi, Restore the Computer to the Default Factory Configuration

Notice:
When you restore the computer to the default factory configuration, all data on the C drive is deleted. Before performing this procedure, back up personal files. If you do not back up personal files, the data is lost.
  • 1. Restart the computer. To do this, click Start, click the arrow next to the Lock button, and then click Restart.
  • 2. As the computer restarts, press the F8 key until the Advanced Boot Options menu appears on the screen.


Note:
You must press F8 before the Windows logo appears on the screen. If you press F8 after the Windows logo appears, the Advanced Boot Options menu does not appear on the screen. If you do not see the Advanced Boot Options menu, restart the computer, and then repeat this step until you see the menu on the screen.

Good Luck (please don't post in all CAPITAL LETTERS next time)
  • 3. Press the (Down Arrow) to select Repair Your Computer on the Advanced Boot Options menu, and then press Enter.

z93zoxmh-dell-s-.png
  • 4. Specify the language settings that you want, and then click Next.
  • 5. Log in as a user who has administrative credentials, and then click OK.
  • 6. Click Dell Factory Image Restore.
  • 7. In the Dell Factory Image Restore window, click Next.
  • 8. Click to select the check box for Yes, reformat hard drive and restore system software to factory condition.
  • 9. Click Next. The computer is restored to the default factory configuration.
  • 10. When the restore operation is completed, click Finish to restart the computer.
Not finding what you are looking for?

125 views

Ask a Question

Usually answered in minutes!

Top IOGear Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an IOGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...