...seems dells dont like Ilumina's, and they get this error code. Disable the network control function in the DELL settings. And this error will not re appear until another dell is
Question about Canon Office Equipment & Supplies
...from the network or the computer This usually solves this error. If error persists while printer is disconnected from the network or computer, replace the EIO/Network Card and or the Formatter ...
Question about Canon Office Equipment & Supplies
...network it give error e.g.( error ssg_thnk-32 diag error) how to solve this problem plz help me Thanks Hardeep Singh from India, Chandigarh There might be a firmware update on the printer, try that. ...
...network support. If the error occurs when the printer is idle or not connected to the network or PC, there may be a printer hardware or connection problem. Sometimes a bad connection with an Internal ...
...remove the network card and turn the machine on. if the error persists then replace the hard drive. If the error does not come back then replace the network card. Good Luck! where did the hard ...
...If the error doesn't come back up swap the network cable, with a good one. 2.) Firmware upgrade 3.) Replace the system board Based on my experience it's either the network cable or the system
...error? I'm at work and I am afraid I broke the printer please help!!!! Per HP: 49.xxxx errors are "communication errors" and can be caused by many things:Corrupted driver, corrupted firmware, ...
Network error CE-02 Our machine was recently moved to a different connection on the network. Whenever I try to scan I get the message: Network error Please see network administrator CE-02 You didn't ...
Question about Sharp Office Equipment & Supplies
Network error ce 00 We have a Sharp MX-453 in our office. One day it lost our folder share for our accounting department. When I recreated the share, we were able to scan to the folder just fine, but ...
...error has occured while testing. If cycling the power does not solve the problem you should replace the formatter board. Also It could be a problem with the power supply or DC controller. There may ...
446 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions