OKI C3400N Single Pass Color Printer "keep saying near empty" Questions

saying how the RFID chips work and how the PRINTER keeps the counts. However I bought 3 sets of chips and found that the RFID chips were the ones that actually kept the count and NOT THE PRINTER. When

Near empty." Wait to replace the cartridge when you get the "xx empty" message. 2) XX Empty - you may not be able to continue printing. Replace cartridge "xx" now per your manual. If you have replaced

...near empty or empty ink cartridge? Is there a way to completely empty the ink from the cartridge? Sometimes the printer tells me to change the ink cartridge and I can still see and hear ink in the ...

...saying paper tray empty Not sure but there is usually a lever or pin that sits near the bottom of the paper tray to let the machine know that there is or isn't paper in the tray. It may have broken ...

...saying that it is nearly empty. Plus, the light is flashing. you have to reinstall the printer as you first purchased it,realign it the whole bit.but most of these priters figure you change both at ...

saying alternate cartridges empty sometimes 2 or even 3 at a time when reinserted shows all cartridges nearly full but keep getting the problem. I have always used new HP originals not out of date try

...saying unable to clean and trouble shooting I've tried a lots of things but nothing is work what do I do May be an obvious thing to check, but are any of the cartridges near empty? If they are, the ...

empty cartridge of ink, even though minutes before it was completely full. Is my printer just completely broken or is it fixable? Re-set printer and see what happens! Epson is not near the best and so

If you don't care about an accurate readout, buy cheaper cartridges and swap the chips. I'd suggest keeping spares on hand and change them when one color stops printing

...saying reinstall that there is no cartridge in machine.... and yes, have been installed properly! :-) any help is appreciated... thanks try with clean the catridge nozzel and see if it is not working ...