Brother HL-5240 Laser Printer "manually reset drum counter" Questions

...reset the drum and page counter after changing drum & counter, instructions in handbook says the reset instructions are with the new drum, they are not. Reset the drum counter as follows: Open the ...

Reset the Drum counter as follows: Open the front cover. Locate the control panel button under the LED lights on the left side. Press the control panel button until all lights are lit, then release it

...reset the drum counter on a brother printer HL5270 DN My printer prints fine but tells me the drum needs replacing! It stops working until I have turned the machine off then on. There should be a way ...

...reset the Drum counter. However when I close the front, the drum light still flashes. I try to print a status page , but the status light on the printer turns orange (from green) and the drum light ...

...drum kits and the toner light is still on. unable to print. what's the problem? Drum counter usually has to be reset.. Check user manual or go to Brother's site if you want to drive yourself crazy ...

...drum, reset the drum counter: with the printer on and the drum light blinking, open the front cover and press and hold the GO button until all of the LEDs light up (about 4 seconds). Then release the ...

...reset its cartridge so pls give me solution Try resetting the toner counter manually;  * Turn off the printer and open the front cover * Press and hold the Go-button down * Turn on the machine ...

reset the drum counter, open the fron cover, hold down the start button until all lights lit up. then release the button and shut the front cover. I all so have the same problam, my printer all so not

...reset of the printer Drum & Page counter: With printer tuned on. Press and hold the ?internal button? behind front cover, until all LEDs illuminate. Make sure Drum light is off, then release and ...

...drum counter. You have to reset this counter to tell the machine it has a new drum clear exposure clear exposure 24 start 7 start clear twice. The copies are nearing the preset counter in the unit. ...