Canon BubbleJet i320 Printer "print cartridge" Questions

print cartridge. my i70 Canon photo printer will not print. It was printing fine before I changed the black cartridge. Changed cartridges ran maintenance and still test page nor document will print. .

...cartridge in a downward manner until no more water runs out. 6. Snap the print head back in and put all the cartridges back in their proper place; make sure that they snap in completely. 7. Print out ...

...print heads of the cartridges manually: # Hold the cartridge upside down, with the bar-code label facing you and take a damp paper towel. # Use the towel to wipe the printhead of the cartridge on the ...

...print the numbers/letters to guide the alignment, or columns A and F... any suggestions? Is the new cartridge genuine canon or compatible? Usually the compatible cartridges contain ink that clogs the ...

...cartridge yesterday and it won't print. The paper goes through, but there is no print on it. The problem could be that you would not have properly installed the Cartridge into the Printer. Please ...

print a document, every other line is light and not printing. What would that be? I have to ask this question of you, just to make sure this is not an issue. Are you using a factory new ink cartridge?

print, but picture comes out too yellow, what can I do? Recheck the placement of the ink cartridges. The black ink cartridge is larger; the cyan, magenta, yellow cartridges are all the same size. When

...cartridge on my printer, and now when I try to print a Test Page the only thing that is printing is the Microsoft windows logo and nothing else. I tried a different ink cartridge just to make sure ...

...printers have the printhead on them, some have it on the cartridge. Replace ink, reset black ink level, cancel the alignment for now, go straight to printing. Print a test page and see how it

...print is coming out yellow. Ive given it a full clean and still no luck. Any ideas? This is a touch printer. Are you using "refilled ink cartridges" If so, that would be the issue. It sounds like a ...