Dyson DC25 Bagless Upright Vacuum "put hose back" Questions

...cover the hose and feel if the suction got stronger, then replace the hose, if rhat doesnt work find something to push the clog thru the hose and periodically put the hose in to suction the clog

...put the hose sock on the tube. You then slide the tube over the hose and take the hose sock off at the end. Tie the hose sock securely in place and start pulling the tube over the hose. The sock will ...

...if you can do it outside with a hose . Don't put it back on the vac until you've swung it round a few times to clear all the water (don't hit anything do it outside in the road!!!) and left it to

...push a broom handle into the hose, preferably from the end that connects to the canister. Put the hose back on normally and see what happens. push a broom handle into the hose to get the blockage ...

no instructions. Got it put together but don't know where to put the hose to clean carpets. The hose should wrap around on the back by the cord. The holder is made to hold the hose as well as the cord

...stuck on hose. Reconnect the hose to the main unit, same as when putting back in to upright mode I.e. click the hose back to the main unit and then pull the attachment and it should easily come ...

...put the hose back onto the machine. Keep the cyclone cylender bin off. Spray the bottom of the hose with a lubricant such as wd40 or polish then take hold of the bottom of the hose and push it into ...

...that is leaking. open it up again and check the pump there is probably a hose leaking ,did you put the clamps back on the hoses If you don't put back the tie-wraps that secure the hoses, it will

...can I fix this? The hose part of my shark navigater lift away came off. I need a way to put it back on. Any suggestions? it should just snap right back into place if not you need to get a hole new ...

...wand/hose to be difficult to remove and put back in place. If you need further assistance, please call our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US). Kind regards Darran Dyson Customer ...