Xerox WorkCentre XD105F Laser Printer "paper roller stuck" Questions

...does not allow the rollers to roll freely and hence is as bad as paper jam. The idea is that the rollers do not roll whether because of paper or some dirt on the roller teeth. They have to be

roller. Most of the paper sheet that jammed has been removed but I can see some remnants of paper still stuck around the top roller but cant get to it. Need help identifying how to remove the cover at

...paper inside the printer roller. 2. Clean your printer roller. Just wipe it using any soft cloth or anything as long as it is soft. 2. Reboot your printer. Take note: You should turn off your printer ...

PAPER BEFORE USE AS NO AIR BETWEEN THE PAPAERSOR HAVE TO REPLACE THE PAD AND UPLIFT ROLLER RUBBER[1 PIECE ONLY PER TRAY] IF STUCK AT FUSER AREA,JUST CHECK THE UPPER & LOWER ROLLER, THERE SHOULD BE

...stuck. Is the paper stopping just as it gets to the rollers, or stops when it goes through the rollers and are getting stuck on the little fuser claws? If the paper is stopping right when it gets to ...

...paper stuck Turn off the Printer Remove the Rear Access door Check for any bits of paper stuck in the rollers Clean the Rollers with lint free cloth ( upward exactly how the paper rollers) Open the ...

...help. Hello sir; There should have a paper stuck over the pick up roller that you can't see if you pull out the tray paper should be squeeze together. the solution way is replace paper pick-up

...roller's with some rubbing alcohol and the paper should go straight, UNless something got stuck in there, Ripped piece of paper might also be the cause, the older the unit the more it needs the ...

...I would closely examine the exit roller. When the paper fans; it's sticking on something. Typically, stuff will ":hide" on rollers; or maybe stuck on a sensor. Using a good flashlight will

...paper gets stuck and won't print We have a Lexmark 2500 printer/scanner and it won'tprint the paper gets stuck it pulls thesheets on an angle no matterwhat I do Help I have the same problem, I don't ...