Behringer EUROPOWER EPX3000 Stereo Power Amp "faults" Questions

Have a xga 4000 amp only channel 2 works fine . Channel 1 very very low Switch input connection pairs and if the 'fault' doesn't changes from one channel to the other it is almost certainly an ...

power dont *** on It is possible that the amplifier had encountered a fault with a higher current drain which had triggered it to a protection fault condition. The fault can be your output drivers- ...

power supply board the mixer had a fault for a long time switching off then switching striaght back on . have u every come across this fault an know wat it is check your relay swithch, it could be ...

Why does my gigrac power down after a few seconds? did go back into shop a few years ago for loose unsoldered connections Your unit is telling you that there is something wrong. This can be in two ...

I have't used my dtexplorer electronic drum kit for five years and now it wont power up. Any suggestions? Does it have to have the lithium battery working or should it work off mains without it? ...

Fault on auto mixer The level meter is constantly into the yellow and the auto mix is not working, the mixer works on all channels and is OK on manual. Can anyone supply a schematic of suggest the ...

My peavy escort 1500 keeps shutting off but will come back on if I turn it off and on is it a fuse? Need to know if there are fuses.can I change it to fix this problem Can't be fuses, as it comes back

off plz I really a solution cus im so tired lots of issues there will need taking apart to find the faults and repair some possibles power source input low internal circuity faults switches dry solder

TH-15A won't make sound. Comes on, then flashing front light This probably means there is a failure and the internal protection circuits have activated. It will probably have to go to a shop for ...

very loud cracking when turning on standby switch Last night, before and after home use, no problems. When I turned the amp on this morning (same location) I turned the power on, with the standy ...