Question about SIM2 Office Equipment & Supplies
Projector is brand new out of the box. Powers up displays Sim2 logo then lamp goes out power light starts to flash and turns off about 3 minutes later. Same thing every time it's turned on. Anyone had
Question about NEC Office Equipment & Supplies
status is blinking constantly don't understand what to do. fan error how to resolve it? These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON
red light blinking... These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. ...
...I have a vivitek qumi q2. It runs for about one minute and the turns off followed by a series of blinking lights on top, 3 blinks, pause, two blinks. It is getting warm so I think it may be a fan ...
Question about Epson Office Equipment & Supplies
changed bulb for epson brightlink 455wi but its still blinking red Is it just one light blinking red or all 3 blinking red? Be sure to 'reset' the bulb hours. Try another bulb. If it is all 3 lights ...
Question about Sanyo Office Equipment & Supplies
...get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching ...
Question about InFocus Office Equipment & Supplies
after green blinking goes out, image appears for 10 -30 seconds, then goes off and red light starts to blink. Sequence is 4 blinks, very short pause, then again 4 blinks. Lamp has been in use for only
Replace the 2 bulbs. Unit powered up correctly and turned on like normal. Then Lamp1 and Lamp 2 indicator lights blinked (Indicating Start UP). After some period of time, it switched to Red 6 times ...
...unplug the power cord and plug back in and it turns on but now it will just fan on then start blinking all the lights except solid orange for lamp/shutter EVERY time. HELP! These blinks
...light is off, check the lamp door. if the power light blinks and the status light is steady red or blinking green, you have a power supply/ballast issue. you may have to send it in for repair. try ...
86 questions posted
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
70 Questions