Whirlpool WFW9450 Washer "keeps adding water" Questions

...keeps adding water to finishing spin cycle Machine comes to the end of synthetic cycle with approx 7 mins left. When drum spinning keeps adding water, then draining. Does this quite a few times then, ...

...adding water When the washer should stop adding water it doesn't. It has started just tonight of making the sound as if it's doing the inital water fill through the entire process of the wash ...

...Water inlet valve If it fills with water and starts the cycle and the water keeps running in then your water inlet valve on the back where the water supply comes in is sticking. It needs

adding the softener to the softener tray of course) is to top up the softener tray with extra water, top it up to the 'max level' line (keep a bottle of water by the machine). That way, even if only a

...keeps recycling (keep filling water without draining) until 14 minutes left then the timer gets stuck. Could switch lid cause that? When open the lid the machine stops. A lot of water gets in machine ...

...adding any cloths or products to the wash......if the suds are gone or just reduced, then keep repeating til the water runs clearand to clean the dirty whites, try washing in cold water first, then ...

...keeps adding wash time. It is getting to long. CleanSensor mode, indicated by a "Sensing" LED on the control panel, extends the cleaning cycle based on the level of soiling and the ...

...keeps switching from fill to spin and won’t cycle through the rest. water level switch indicates water level to low so keep adding water your drain hose may be too low cause the water be sipon ...