Minolta EP4000/5000 CS/PRO Copier "location fuser thermistor" Questions

Question about Savin Office Equipment & Supplies

Need to replace the thermistor on my Savin 9945

...thermistor. open the right side and the front cove, the fuser is located on top of the OPC carriage unit, push the blue level going to the right side while pulling the fuser unit. after removing the ...

Question about Xerox Office Equipment & Supplies

1 Answer

Xerox 4150 workcenter says fuser module needs to warm up. This appears usually first thing in morning. I have to power off then on to stop this from showing on the screen. also, it wont print until af

...Fuser assembly, PL 10.25 Item 1. • HVPS, PL 1.10 Item 2. 10. Perform the OF5 Main PWB Check RAP. 4250/4260 Checkout NOTE: The main PWB has test points. The location of the test points is shown on the ...

Question about Toshiba Office Equipment & Supplies

1 Answer

Toshiba e-Studio 232 Black and White Copier C430

Toshiba e-Studio 232 Black and White Copier C430 Fuser Unit problem. The fuser is the part that heats up and is located right where the paper exits the machine. Most common problem causing this code ...

Question about Ricoh Office Equipment & Supplies

1 Answer

Need diagram on the location

need diagram on the location of fuser thermistor open circuit connections. look the first thermistor is beside fuser pluge and further is number 2 ok i hope i help yo

Question about Ricoh Office Equipment & Supplies

2 Answers

Thermistor Location on Ricoh CL4000DN

Location on Ricoh CL4000DN Hey guys I need to know where the "Thermistor" is on the Ricoh CL4000DN. Somebody pls help! thanks! Matt Thermisters are located in the fuser unit. They contact the rollers.

Question about Minolta Office Equipment & Supplies

1 Answer

Service Call 172 Fatal Error

...and f: 231.4kω (at 25°C) Fuser Unit a b Heater e f Thermistor c d Fuse e f Thermistor c d printer. Leave it for 30 min. The Thermistors are located in the fuser assembly. Hope this ...

Question about Canon Office Equipment & Supplies

1 Answer

If the error E000 is a fuser lamp problem or the

...fuser lamp problem or the thermistor/thermofuses, where exactly are these located? This is the section that heats up inside the machine, located at the exit side of the copier. For this machine you ...

Question about Ricoh Office Equipment & Supplies

2 Answers

Ricoh ft3713 error code e54, where is the fuser and thermistor

...fuser and thermistor please help You need a tech, or a new machine. The fuser is the heater section nearest the exit of machine - where they are always located. Your error message indicates a blown ...

Question about Ricoh Office Equipment & Supplies

1 Answer

Richoh FT 3713

Richoh FT 3713 We are experiencing difficulty with our copier. It's flashing an E55 message and the maual booklet has been misplaced!!! Help!! E55Fuser thermistor open replace thermistor located in ...

Question about Minolta Office Equipment & Supplies

1 Answer

Toner does not print onto

toner does not print onto copier paper Verify the fixing unit,your fixing lamp or thermistors is in malfunctioned.Clean the thermistors,thermalfuses or the thermal lamp located in the fuser unit.