...door dispenser light bulb ( appliance bulb) twice each time when light is turned on, the filiment in the bulb is very, very dim....replaced with another new bulb,...same problem Put a new York Bulb ...
light on freezer door stays on dim until door open if you push the light button on the panel it will get brighter how to turn it off without removing bulb maytag plus side by side Did you try pushing ...
...door is shut the light goes dim but not completely off. Thinking a dodgy contact might be the cause. Have replaced the switch but no change. Have rcd fitted and PAT tested but no help there both do ...
...door not working when you press the lever. Also the light dims when lever is pressed. Icemaker working fine. Sounds like a frozen waterline. I fixed mine by leaving the light on the dispenser on. It ...
door the led dims along with the light bulb by dispensor board on back of unit behind panel on right side, check for capacitors bulging on top they are supposed to be flat. I had this problem with two
...light bulb on on the front of the door, and press the lever, the indicator lights do not go out. They stay on, but the light bulb dims for a few seconds then brightens back up. Water dispenses fine. ...
The night light illuminates then goes dim, the ice shoot door opens. No motor action although motor does turns freely by hand. Any Suggestions?? -Thanks Try removing the freezer light bulb completely
...light had stayed off even with door open. Do you know what the problem could be? your motherboard in the lower rear area of the unit is defective,if you have had light bulbs burned out in the ...
...light bulb it the noise is gone. Noise coming from somewhere near compressor coils on the bottom? 2005 Whirpool Gold side by side this is caused by the motherboard on this model,have replaced many ...
398 questions posted
Usually answered in minutes!
3,171 Questions
927 Questions
304 Questions
262 Questions
