At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I went to put a new deck in my 95 4runner the old one worked but was real old, so i got this used one, new to me , deck.. it wont work, all you here is static.. please help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
torque converter solenoid requires replacement. Look it up on Youtube for detailed replacement... it's not difficult, just be clean and have both a new think blade paint spatula and safety razor blade handy to scrape away the old gasket once you remove the old part. Use Simple Green to clean up the area all around it before you remove the old part... cleanliness is the key to prevent dirt and any old gasket remnants from ruining the new part your about to install.
probably shorted out the deck but try different deck if that works then your old deck is shot but i have had amps do the same thing and i just changed the ground on it and they still work fine
Most aftermarket pioneer cd/radio decks have the electrical connector for the antenna that I've seen.
Is this a cd only deck, or does it have radio functions?
Did you use a new harness wiring adapter to get the pioneer radio to work with the old harness?
There should be a color coded set of wires for the power antenna on that. And, then the Pioneer radio should have wires that were labeled for the power antenna.
Yhe information you have given is hard to understand but from what you said it sounds like a linkage arm might be off. Go underneath the car and look at the linkage. Check for a rod that is off and if so replace it and use a new cotter pin to keep it there.
Try using old key turn from "Off to on" not starting car 7
times--remove and insert new key use same procedure--then try to start
w/new key.
If you have 2 "old" keys do the same thing with 2nd old key before using new one.
battery went dead because the rear windshield wiper didn't go off during the night, as soon as you put a new battery, the wiper start to working and won't stop. probably the switch out of order, A/C doesn't work, check the fuse.
×