Torque setting on main and bigens and haed in n/meter
Torque specks on 4y silinder head
You will get all info on wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything totally
this website www.reliable-store.com
it's a very good site for all vehicles even my car 1991 model.
SOURCE: torque specs for toyota tercel
Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa. Roger
SOURCE: I would like to know
Torque settings for cylinder head bolts on Toyota Hi-Lux 2.4l petrol - 22R engine code
Tightening sequence:
Cylinder head instructions:
Renew bolts: No
Stage 1: Tightening torque = 25 Nm
Stage 2: Tightening torque = 50 Nm
Stage 3: Tightening torque = 78 Nm
Please do rate my response. Thanks!
SOURCE: head torque settings for toyota 4y
SEQUENCE IS START IN THE MIDDLE WORK IN CIRCLE TORQUE IS 53TO63 FT LBS IN THREE STEPS I START AT 30 FT LBS
14,044 views
Usually answered in minutes!
×