Question about 2007 Toyota 4Runner
If it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again
Posted on Jul 13, 2012
Usually 2 options to reset toyota light.
1.remove small rubber plug in dash clear lense.use a long thin rod to reach in and push the small reset button at the bottom of the gauges.Light will extinguish.
2.remove the instrument panel and unplug all from behind to turn it over.Usually in the centre of the rear you will see two holes and 1 screw.for t-belt.shift the screw to other hole.refit dash ensuring all the plugs are refitted.Light should now be out.
Posted on Apr 02, 2011
For digital ODO:
Posted on May 10, 2014
1. turn ignition to accessory position
2.Press and hold the trip meter button and turn on the ignition. Continue to hold the trip meter button for 5 seconds or more ensuring that the timing belt warning light is flashing. Release the trip meter button then within 5 seconds press it once.
Posted on May 14, 2020
Tips for a great answer:
Feb 10, 2016 | Toyota Cars & Trucks
Feb 11, 2015 | 2010 Toyota Hilux 2.5
Jan 16, 2015 | 2007 Toyota Hi-Ace 220
Dec 02, 2014 | Toyota Cars & Trucks
Sep 21, 2014 | Cars & Trucks
Aug 26, 2013 | Cars & Trucks
Mar 13, 2013 | Cars & Trucks
Mar 06, 2018 | Toyota Cars & Trucks
Aug 21, 2011 | Toyota Land Cruiser Cars & Trucks
28,819 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: