Ultra Popular Questions, Answers, Tips & Manuals

the unit has 2 audio out ports that you can send to your amp plug rca cables to the correct aux inputs on your amp and switch the amp to the correct input on the controller and you will hear sound ps we needed to more about your amp in this case but if it has a red fiber connection for audio that is better because it is digital between the TV and the amp http://www.digimetroonline.com/tv/2006/03/02/famous-brand-ultra-lcd40-500-40-inch-lcd-tv-wspeakers-refurbished

You would have to dismantle the laptop and remove the BIOS battery for 5 mins then re-insert it to reset the BIOS to factory setting. I found this reset option (picture below) online but have never tried it ..............

How to remove the panal lock. I don't have remote ?

honestly go to ebay or amazon and buy the correct remote for the model otherwise your screwed

I would return it for a replacement.

check in the bluetooth settings to pair the keyboard to the ipad and on the keypad of the case check for a button that says pair on it

You are in a weak signal area and could use a good a good outdoor antenna and possibly an amplifier.

There is nothing in the manual that provides information regarding the drive train at all. According to Pride Mobility, if the unit pulls to one side, it needs to be serviced by an authorized pride mobility service center. Here's a link to their website where you can download the manual from, or contact them and see how you might get the unit fixed -

You can find all Harley info at the link http://www.harleyhog.co.uk/wiringvarious.htm

http://support.hisense-usa.com/support/manuals.asp Here is the Hiscense manuals you will have to enter your model or serial Number. Then you should be able to view the info you need.

Do you mean you need to insert the batteries ? If so, I would expect something as basic as this to be comprehensively covered in the manual.

Here's a how-to video - Model 1100 In Service Video Ultra Clean Systems Inc

Not for this site.

765 to 800 pounds from factory

hi Cindy, normally that is associated with low batteries... Regards Rob www.gewizrepairs.co.uk

Check whether the audio is muted by accidental press at remote control button. Enter its sound menu, and check it. If muted, as you know there will be no audio output. If not muted, Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electronicshelponline.blogspot.com/

Have you tried another battery? Maybe the one you have is defective?

You need to install software to make the added drive function.

Indoor aerials are exclusively for areas with a strong signal and the way digital tv works a good signal is essential. I expect the signal where the aerial is sited has a poor signal strength and a high gain outdoor aerial will be needed. I suggest you have a look around and check what the neighbours are doing but bear in mind the signal strength in built up and fringe areas can be the radio equivalent of micro climates where moving a few yards in any direction and you could either be freezing or growing pineapples. If you can take your tv to a good aerial and do a retune and store the found channels you might be lucky and discover your indoor aerial might receive a few channels well enough for viewing.

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. ..