Questions & Answers for: whirlpool washer 3357978

Washer is leaking from underneath.... Whirlpool Ultimate Care II; has part # 3954181 on rear of control panel, and has #3357978 stamped on rear of machine. Water leaks from underneath washer; appears ...

...whirlpool supreme 8 cycle washer with a 2 speed motor. It drains fine, but makes a funny noise and no longer spins. The only numbers are on the motor: motor #3357978 with a date of: 740A9 i would ...

...Whirlpool 3357978 washer stops spinning violently Six year old Whirlpool 3357978 washer stops spinning so forcefully that it makes a loud bang and shifts position. I believe the fault lies with the ...

...Whirlpool Topload washer Ultimate Care II I have looked everywhere fior the model number Lid/Back and side. No find!! I need the timer motor for this unit. It is 7 cycle, 5 speed Quiet Wash, ...

...whirlpool washer 3357978 will not run? I turn to each cycle, and can hear a little noise but it doesn't run? Hi, The problem may be the motor is short circuited kindly replace the motor, If problem ...

3357978 whirlpool: it would fill water to correct level but would not do the wash - there would just be a mechanical rattle. when i turn it off and move the dial to the spin cycle it would not spin ...

...washer whirlpool ultimate care 2 3956586 it is a silver/white black pewter 3956587 gold/biscuit stolle A 3357978 has a broken knob. Hi from retired Englishman in SW France, Sorry but this forum does ...

Whirlpool Superapacity Plus - 3357978 it started leaking from the bottom front Can you tell me how to take it apart and find and fix this issue most likely it's the pump,part number 3363394 and it

washer do not drain the water and has a humming sound,it is a Kirkland by Whirlpool 9cycle Heavy duty Super capacity plus-5speed combinations the only number that I found is 3357978 please help change

whirlpool 3357978 not spinning washer will not spin. the motor runs and it will drain, just not spin. i pulled the motor and the motor coupling and it is in good shape. pulled the shaft and ...