Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

2 Answers

I have a 6/7 yr. old Whirlpool Topload washer Ultimate Care II I have looked everywhere fior the model number Lid/Back and side. No find!! I need the timer motor for this unit. It is 7 cycle, 5 speed Quiet Wash, Commercial Quality. White in color. The only numbers I can find are: SM8280867, PN3953615, 3357978

Posted by Judy Bain on

Ad

2 Answers

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 254 Answers

Open the lid look under the lid middle center on frame or tub the gap bewtween the lid and console....

Posted on Feb 03, 2010

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a top load commercial whirlpool ultimate care ll with extra rinse cycle LSN2000JQ2
it will not advance after the wash cycle on any setting
my washer is setting with a tub full of water

Posted on Mar 12, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was given a whirlpool ultimate care II washer recently, and the lid switch is broken, but I cannot find what the model number is for my washer (believe me, I have looked EVERYWHERE for it!), and the part...


Usually the model number is on the lip of the inner rim of the washer when you open the lid...near where the water comes into the basin. But even if you can't find the part number for the switch or the washer, you can just defeat the switch by taking the two colored wires from the switch and twisting them together...no switch needed then!

Jul 27, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

How do I change the dog agits in the ultimate care whirlpool topload washer model lsr8233eq1


Remove number one then 23 then number 2
Then remove the agitator. Set it on the floor and yank it apart. Install the new part being careful not to break the retention tabs on the base of the agitator. Here is a nice video which shows how it is done:


More videos and a service manual are HERE

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Nov 19, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

2 Answers

Find serial and model number


Normally on top load machines open the lid and look toward the back hinge area inside the lid. It is usually on the back there. It may also be posted on a white sticker on the back of the machine.

Apr 30, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

My Whirlpool Ultimate II topload fills with water but does nothing else. The lid switch appears OK


it might look ok but not all the time it is. If the switch is good, maybe it is a burnt or bad connection at the motor. or it could be a bad motor

Mar 01, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

My whirlpool 8525079 topload washer fills with water but does nothing else


Lid switch should 'click' when lid lowered. May need to be renewed if you can't hear this.

Feb 27, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

How to remove back & top of a whirlpool ultimate care II washer


I'm not sure of the model number of the stove but usually slide a putty knife under the control panel between the bottom of the control and the top of the base. There is a clip on each side then the panel will tilt back and you can take it off. After that there are 2 gold clips that hold the back on to the base. Remove them by snapping then out of the base. The the whole thing is loose and the base (where the lid and sides are. Comes out as 1 big piece. If you get the model number from under the lid, you can go to http://www.searspartsdirect.com/partsdirect/index.action?intcmp=xsite_Sears
and it will show you a breakdown of the machine. Let me know if you need anything else.

Mar 29, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

I can't find the model number on washer Whirlpool Ultimate Care


Model # and info is under the lid. Open lid and look directly under it - area facing you. You should see a small silver tag with all the factory info on it. My washer is also 9 years old.

Dec 08, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

1,574 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...