Question about Nexxt Premium WFMC6400UC Front Load Washer
...water level in my frontload Wacher - Bosch Nexxt 500. It doesnot wash as well as I expected. I have filling that adding one or two glasses of water will make the difference, because the things inside ...
level comes up 3 cm on the glass. The washer is designed to be water efficent. If you are not getting water this high, look at the pressure switch hose, maybe it is restricted and causing the pressure
...water level. Mine seems to be overfilling, but nobody seems to know what the proper level should be. if you have no leaks, leave the machine alone.if you have, thats a different story.you possibly ...
...water level switch(aka pressure switch), is responsible for regulating the water fill level in this situation. It does this through a plastic tube which runs from the switch in the control console ...
Question about 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher
...water level detector pipe could be obstructed / blocked. This thin plastic pipe is at the bottom of the washer and as it fills to the correct level of water the pressure in the pipe activates a water ...
Question about Integra 300 SHX33M05UC 24 in Builtin Dishwasher
...water level during the wash is too low to check put machine on let it run for 5mins then open the door once the water settles the level should be just below the salt cap no lower if it is then you ...
...water level. Once the dishwasher has filled and pumps normally (about 5 min into a cycle), open the door (watch for splashes) and check the water level. Is should sit above the metal water filter ...
...water level be I've checked the pressure switch with a multimeter by blowing gently into it and it clicks and switches the terminals correctly. The air tube doesn't have any kinks in. What level ...
Question about Nexxt 300 Series WFMC2201UC
...water in drum,drain passage clear. Unplugged the pressure sensor..still DOES IT Bosch Nexxt 300 WFMC2201UC/13 Possible that the drain pump is running due to a small leak is present at the base of the ...
Question about Nexxt 300 Series WFMC2201UC
...water level sensor in bosch Maxx6? The water level sensor is usually a pressure switch which is located into the appliance. You should remove the upper cover first and you will find it at the left or ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions