Questions & Answers for: washing machine drum rubbing seal

will turn for about 3/4 revolution - then it 'flops' against the rubber seal and rubs. Is it the bearings? How do I fix it? Thanks You can buy new drum Spider which has bearing fitted check cost 1st..

...drum seal on my Whirlpool duet front-loading washer is chipping apart. The drum doesn't run true, is wobbly and has a rhythmic rub when turning. How do I replace the drum seal? Model GHW9100LW. You ...

...rubbing when high spin to where the bottom front of the basket is hot, and when i just turn basket by hand i hear and feel basket rub any idea what this is? Bearings on way out allowing drum to rub ...

...drum is rubbing due to POOR ALIGNMENT or poor BEARING settings. You need to check the PLAY on the drum and if this shakes a bit then the assembly must be reset with correct aligment and the drum must ...

...drum is rubbing against the door seal. Somebody suggested the main bearing is shot but the machine still washes well and is quiet. The problem only seems to be when a full load is spun at 1200 The ...

the center drum is rubbing on the rubber door seal and melting center drum rubbing on the rubber door seal Sounds like the bearings are worn out

...drum rubbing on the door seal. Check if the inner drum is loose and flops up and down. Also spin the drum by hand and see if it's touching the rubber door seal anywhere. If it spins freely but make a ...

Drum not spinning true it oscillates rubbing seal away Spins fine No noise from Bearings Put New door seal on its rubbing Not door seal problem Poss well overloading What else can I look for? ...

...washing machine door seal but now rubs I changed the door seal on my washing machine today. Just put it on a spin and it's rubbing against the drum to the point there was bits of rubber in the drum. ...

...I can change the seal but am concerned there is a bigger problem as to why the drum is rubbing. Any ideas please? That will usually happen when the bearing is worn or the shaft has moved on the