Questions & Answers for: Umax can i unplug the scanner

...information on what this error number indicates and I've checked all the connections to my scanner, unplugged them all, rebooted, plugged them in and rebooted again. Still nothing. Any ideas? This ...

...to the Wall outlet directly and it is doing the same. Also, I tried Power cycling the Scanner by unplugging and replugging the Power cable from the Scanner for 2-3 Times. The issus remains same. ...

...on what my issue might be? Thanks in advance, I had the same problem. I turned off the scanner and unplugged the transparency unit from the back of the scanner and restarted and it is working fine ...

light stuck the cariiege is not moving unistall software, unplug scanner, restart pc, load software and connect scanner, if problem still exsist it the scanner and needs to be replaced.

...will not preview or scan...says error occurred during preview. Have restarted computer after unplugging & plugging back in. Starts to go, then stops. we want a software for my scanner Astra ...

...unplug the scanner Uninstall what is there Start over with a Clean download and install ( Be absolutely sure you are downloading the correct driver for your scanner and Op sys.) Also go to ...

...and right side of the photos or document. The scanner use to stay on 24/7 until I realized it and unplugged it. Today after having it unplugged for a month now, I go and try to get it to scan in ...

...in your skills, you can (UNPLUG FIRST) disassemble the scanner and use a microfiber cloth to clear anything on the light bar that scans your documents off. Hope this was a little helpful, ...

...plastic melted This sounds like there is a short circuit somewhere in the device. I would leave it unplugged and seek professional help. It may be more cost effective to just buy a new

...7 does not respond saying there is no driver Sounds like you have a hardware/firmware issue. Unplug any new hardware - reboot - after logging in then replug your ...