Questions & Answers for: tube reversed hot cold

reversed where cold water is beingsupplied, but never hot water. So, how can the problem bedetermined? It is as simple as switching the wire harness plugs on thehot and cold side. In the example above

...reversed where cold water is being supplied, but never hot water. So, how can the problem be determined? It is as simple as switching the wire harness plugs on the hot and cold side. In the example ...

...hot side is less than the water pressure for the cold side. what can be done to correct this? one of supply tubes partly blocked,turn off water supply ,disconect coupling for tubes underneath, remove ...

...reversed where cold water is being supplied, but never hot water. So, how can the problem be determined? It is as simple as switching the wire harness plugs on the hot and cold side. In the example ...

...reversed, the tank will not work. Pipes on top of tank: cold water enters tank and is sent to bottom of tank in a long tube called the dip tube. This means the cold is on the bottom since hot water ...

...tube in the tank has fallen off or the hot and cold lines are reversed at the tank. I'm going to assume it is gas , if its electric you need to test the heating elements for continuity and temp ...

...tube is not in place properly or the hot and cold are reversed.... That is the ONLY way that you can be having that problem.... Make sure you have another person look at the heater... Take off the ...

...hot was anemic then. I pulled stem out and reversed it and now counter clockwise but still anemic Cna you remove water line feeding hot side to make sure it has correct flow. It could have something ...

...water enters bottom of tank through dip tube located on cold side. If hot and cold are reversed, the water heater will not perform as ...

...reversed?If water heater worked before: Sounds like a broken dip tube.Copy following ...