...label printer its not scanning.I have used code39/EAN128 code.Please suggest... Thanks, -Aziz You might want to check the barcode ratio, bar width, printer speed and printer darkness. I am assuming ...
...print dark enough. I am printing black ribbon. I have changed ribbons three or four times - using a different kind of ribbon each time. Is maybe the head not hot enough? I would suggest an update on ...
...thermal Label Printer prints blank with new supplies Some possible reasons: 1. The darkness is not set high enough for the paper/ribbon combination 2. The ribbon is on backwards. Zebra uses ...
...when a label format is sent the printer. If you are sending a format and nothing at all happens at the printer, then that is a communication issue. How are you connecting the PC to the printer
Question about Stripe S600 Thermal Label Printer
...2. The ribbon is loaded backwards 3. You are trying to do direct thermal printing (no ribbon) but the label stock is not direct thermal stock. Maybe you can provide more details. Hope this
Question about I-4208 Thermal Label Printer
printer. The labels print out lightly, not dark enough for our scanner to pickup the bar-code. I have changed the ribbon, the labels, adjusted the tension, etc. with no luck. Can you make a suggestion
...will be most welcome Full resin ribbons tend to require higher darkness settins on all thermal printers. It could be a mismatch between label and ribbon. This would need to be looked by your
Dymo QX50 printer, letter not printing dark enough and some striking. How can I fix the problem. Try fresh batteries. Otherwise, please contact our help desk. The numbers are at dymo.com.
Question about Eltron LP 2543 Thermal Label Printer
...thermal paper. This printer doesn't deliver enough heat to your paper or you have a problem with the head pressure. Press on the bloc while printing to see if it's this reason? You may also ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions