Questions & Answers for: supco rco810 Refrigerators

...good to go. thanks te appliance doc rate me please I replaced all the factory components with a supco 4 in 1. This fridge has a run relay and you must use the the supco part that has a the run

...Supco 3 n 1 start capacitor and have a few questions. I have a Kenmore side by side fridge. Model # 106.53662300. My first question is How do I know if the rco810 is right for this fridge and not the ...

...still froze after installing the new relay. you can replace the relay with a 3 in 1 made by supco. i generally just use a supco 0410. www.supco.com it is a start relay, overload, and start ...

Supco wiring an old freezer. Orange wire? I am wiring in a Supco 3 in 1 hard start in an old freezer that lacks replacement relay parts. My compressor has 3 pins. From the freezer I have a power line ...

how to install supco pulg in receptacle you will remove power from unit , remove old receptical cut wires close to old unit then splice new wire into old polarity is not important

supco dataloger software my computer not install problem dataloger restart and data detail Please give me dataloger software http://www.supco.com/SoftwareUpdates.htm The link above has all the ...

...Supco RCO810 (see link below). NOTE: Before I replaced the starter relay and overload protection with a Supco 3 in 1, I learned how to test the compressor with a Volt/Ohm meter. If you don't have a ...

...sl135 roof top a\c on 1987 honey 421s rv. Unit has 2 capacitors and 1 relay now. Can I add a 2 supco spp6 hard start capacitor? I wouldn't recommend on both capacitors. One is typically for ...

Do the black and blue wire removed from the compressor go together with the other black power wires from the RCO810? I have a RCO810 3n1 Start wich comes with 3 wires(White, black, and red) and 2 ...

Can you calibrate the Supco ST09 Instant Read Thermometer? I put in a new battery and it going all over the place. Question edited for clarity. Question moved from Cars and Trucks. You just buy ...