Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...factory reset, you will need to call Linksys technical support. after reset when i dial **** 110# it say's an ip od 0.0.0.0 if i dial **** 210# it say's 192.168.0.1 but access from WAN side with ...
Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...dial **** when it says configuration menu type 73738# if ask for password then nothing can help you buddy and if it says press 1 to save then press 1 and your device is reset with factory ...
Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...SPA2102.. how can I recover it or is there a way recovering the admin password?. You may try to set to factory default. from the phone you can perform Factory Reset, Press 73738 then Press 1 to ...
Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...reset on my spa2102-R. I dialed 73738# and was asked for a password. I tried "7UprUtew" (found from google) but it doesn't work. Is there any universal password for factory reset? Thanks a lot! you ...
Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...and press **** again, then check if you now hear the voice menu? Just in case you are able to access the IVR, reset it back to factory default settings. Dial 73738# and press 1 to confirm the
Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...FACTORY RESET, PASSWORD REQUIRED!! I tryed all suggested options at all forums I surfed, from 877778# user reset, 73738# factory reset, to a web server configuration, ALL FAILED! Any time I try to ...
...reset your SPA device to the factory default values, follow the steps below: 1. Disconnect the Ethernet cable 2. Access the voice menu (****) and press 73738#. 3. Login with the username "user" when ...
Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...reset that can be done via the phone IVR. Connect an analog phone to the RJ-11 port on the PAP2 and pick up the handset, where you will hear dialtone. Press * (4) times and you will be told you are ...
Question about SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)
...spa2102-r back to factory settings Unplug the unit. Using a ball point point push down the reset button. While pushing the button down, power up the unit. Continue to hold the button down for 15 ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions