Questions & Answers for: sherwood rx 4109 receiver turns

sherwood rx-4109 power shuts off i've made the proper connections to my sherwood rx-4109, but as soon as i turn on any component the receiver shuts off. in the beginning i thought it was the timer, ...

i turn the receiver on, it lights up, and it shuts off. Why? i turn the receiver on, it lights up, and it shuts off after a few seconds. Bad News, it will need repair, I suspect output transistors. ...

sherwood rx-4105 output transistors I am looking for output transistors for this stereo,one is b2510,the other d1510.Have had no luck,are there any crosses? Thanks,Alex. You can also use 2SD2560 and ...

...Sherwood RX 4109 receiver SherwoodReceiver/Amplifier5027 SherwoodReceiver/Amplifier5027 always press the mode key of the device they want to control before pressing any other key Power on the device ...

...sherwood xr-4109) turns off as soon as it turns on Check the speaker wiring in the back. Make sure it is not wired improperly. You could remove the speaker wiring from the back of the amp and see if ...

Sherwood RX-4109 . . . I have to keep volume very low or it will shut itself off. Any help to correct this problem would be appreciated. If Both speakers are working at a low volume and you turn it up

After working perfectly for 2 months, now receiver won't turn on either manually or with remote. Please help, is it getting power, if so check the manual for an internal fuse. you might have over ...

It stopped, while not being used. The receiver will turn on and make that "click" noise that it always did shortly after powering up. But it won't have any sound output. I tried reconnecting the ...

...sherwood rx 4109 has no sound what do i do Tried turnin up volume Pull the sherwood power cord from the wall for 20 minutes. On the back of sherwood, check all cables and make sure they are in the ...

...Sherwood RX-4109 sounds "quieter" and "muddier" than it previously did. Also the "click" when it turns on in quieter. Wondering what this could mean Main board fault. Shorted component/s at its audio ...