Questions & Answers for: reset photo conductor

...photo conductor unit, how do I reset the counters on a Lexmark E232? It should be under Utilities menu -> Reset Photoconductor Counter. ...

...photo conductor unit. If you see lines on any of the green drums replace the color photo conductor unit. You can also get color registration errors if the transfer unit is scrached. my first ...

...drum ***'y. you replaced the drum but you need to replace the toner as well (low toner) then turn off and hold the start key an dturn on to get into service mode, scroll to reset photo count,

Reset Photo Conductor Kit I have a bad photo conductor in my printer and replaced it with another one. However, when I try to reset, I get the message that the photoconductor is bad. What am I doing ...

...photo conductor in my printer and I have a lexmark e450dn printer it's showing error 84 replace photo conductor than i chanege new photo counductor but still it's showing same error i want slove this ...

...reset the black or color PCU correctly. Match the green arrow at the tip of the photo conductor unit to the rail inside the printer. Make sure the green arrow fits securely on the rail before ...

...How to Reset the Photo Conductor (PC) Page Count After Photo Conductor Unit Replacement on C52x and C53x Series Printers. Just click on this link: http://bit.ly/dk8nHs. Thank you for choosing

...photo conductor, How do I fix this? Whenever you replace the photoconductor unit, remember to reset the PC counter. With the printer powered on, open the front door/cover. Press and hold the cancel ...

...I switch on the copier after cleaning, the message that came on the screen was "Please reset Photo-conductor" Please, do help me reset this conductor. Jerry. Unplug it wait a minute plug it back ...

...clear or the printer to print All pc units have been replaced and printer reset. The PC or photo conductor must be bad or needs to be reseated. I cannot state more given no make nor model was