Questions & Answers for: Kicker my rca cable

...RCA cable. The red lead on the center conductor. You may have to turn the volume up to get a reading on the meter. At high volume, you should read at least one volt but the actual voltage will vary ...

...they should be plz help Not enough BASS!!! I have a 99 chrysler 300m, stereo still factory, so no rca outputs. I installed a NITRO 1000 watt amp, and one Rockford Fosgate P3 10" sub. My rca's are ...

Configuring the amp using 1 set of RCA cables This is a 4 channel amplifier and I am trying to figure out if it is possible to run one set of RCA cables from my equalizer to the amp yet still be able ...

...The amp is in protection mode as well. What may be my problem? YOU HAVE A SHORT CIRCUIT WITH THE RCA CABLES THAT ARE GOING THO THE SUB WOOFER AMP CHANGE THE RCA CABLES FOR A NEW ONES!! AND IF YOU ...

...rca cable or inside the amp itself. swap the rca cables around to see if the channel not working works and the channel that worked before doesnt work. if this is the case, it's an issue with the rca ...

i cant get audio output It maybe the input out put cables or called rca cables

amp stopped playing riding down the road, power light turned off. came back on when i unplugged the rca's and cuts back off when i try to plug them back in. Faulty RCA cables, Or worse possible ...

...RCA cables. run the 12v cable down one side of the car and all the other cables down the other side. if this is not your problem it might be due to a faulty altenator which is overcharging and needs ...

...with wires that i have from my LED Glow Lights that i have connected to the fuse box, and the RCA wires are connected to the new head unit. I turn on my system with out the RCA wire installed ...

...rca cable touches the input rca connector, the protect led lights up and the remote is bypassed and the amp won't shut off. Works fine when either left/right cable is plugged into the right (red) ...