Questions & Answers for: Xerox put color code

...finisher/stapler code coming up so I can let you know exactly whats going on. I hate that software puts a machine down for functions you do not 100 percent

...color is not ok please expect your valuable advice good day, is thier any troble code any apears? if none try to check the red cartrage if installed properly. I'm brian001. I put up the similar ...

...PUT A CODE INTO THE PAD , ANY IDEAS WOULD BE MUCH APPRECIATED . SIAN X here is how to print the fault codes. http://www.office.xerox.com/support/dctips/dc99cc42.pdf Not sure if it tells you how to ...

...for the fuse is written on them. Worst case is the developer motor has seized, taking it off an putting it back on again usually remedies this, but its a bit more awkward to get to. Fuses ...

...150 color copies, I need 150 more and my printer won't respond. Off the printer. Remove all the cables, wait 5 min and put cables back and restart it again. or remove the toner and put it

...,the motor was tide up to removed it we had to enter to the diagnostic system and removed the code and put code 776-061 and then put the value in cero and for sure the it will start working

...code, e-mail me at [email protected]. Just put Xerox M24 in the subject line please. after booting the machine, it boots only the scan icon is working and copy icon is off, it is not functioning and the ...

...code 22-504 (Paper Properties Mismatch). The tray has the correct paper size ... what to do? All the pending jobs are idle ... Check the print settings on the documents that are idle; they may be an ...

...code, I switched off and on again? the first switch after 5 seconds as indicated. Same thing, nothing, so I wiped the color sensors. The problem persists. What to do? Call for Xerox Service ...

...color cube? Process Drive Fault" Do you have another kit you can take from another printer. Switch the printer off. Swap out the kit with the one from the other printer. Turn it back on. If it clears ...