...back is aliegned with the setting crown. Take the wooden tool and using the domed end put a little pressure on the endge watch case near the edge, and slowley go around the back, it should snap into ...
...put the movement back in for about a hour just in case of any gasses.When done gently push the stem and crown back in and close the back. If you have any problems,please let me know. Maybe I can walk ...
...Put the stem all the way back in, then pull the stem half-way out. Start with the stem all the way in and slowly pull it out and you will feel the "click" when it is half-way out. MAKE SURE YOU HANDS ...
...put them back from the right side of bracelet. It is recommended to use plastic hammer to drive pins back in or you will scratch or damage bracelet. If plastic hammer is not available use an old ...
...put them back from the right side of bracelet. It is recommended to use plastic hammer to drive pins back in or you will scratch or damage bracelet. If plastic hammer is not available use an old ...
put it back on I have a Joe Rodeo watch. The leather band is attached. However I cannot figure out how to fasten it. I thought that the leather band was supposed to go through the metal clasp. But the
...cover to replase the cell cant put back lid help watch #355less You will probably need a watch press to get the back on. Call around at your local jewelers as they will have one if they carry
...skagen watch popped out and the nylon ring surrounding the crystal seems too big to get back in, or perhaps I just don't have the right tools. Help! Watch crystals are pressure fitted to their ...
Question about 107sssbd Steel Ladies Watch
...or something sturdy about waist high in order to gain enough pressure to SNAP the back on if this fails due to excessive force I sure the repairman will gladly put it on after replacing the ...
Question about 107sssbd Steel Ladies Watch
have a Skagen watch with two faces the hands have come off one of the face how doI put them back on Take it to a local jeweler. They need to remove the back and remove the movement, or remove the face
Usually answered in minutes!
756 Questions
260 Questions
271 Questions
253 Questions
254 Questions
