on a soft damp paper towel to remove the excess water, then replace in the printer and then reinstall the ink supplies. get more help to fix printer not printing black . hope this helps you. Good Luck
not print in colour.My ink cartridges are OK Hi, Before you print, go into the printer preferences and make sure Color is selected, and not Black and White. Hope this helped! Don't forget to rate;
Question about Interpret S405 Wireless All-in-One InkJet Printer
...printer only is printing in black even though my color ink cartridges are not low. Checked all settings and should be printing in color. Colors don't come out at all. Cleaned print heads and ...
Question about Interpret S405 Wireless All-in-One InkJet Printer
printer only prints in black/white. have put new printer only prints in black/white. have put new colour cartridges inand checked they are working have printed a self test page which has come out in ...
Question about Interpret S405 Wireless All-in-One InkJet Printer
...printer requires all cartridges to have ink in them to continue printing. The 100/100XL cartridges are not licensed to be refilled. You can, however, refill the 100A or 100XLA cartridges available ...
Question about Interpret S405 Wireless All-in-One InkJet Printer
or click OK.The printer folder opens.4. Right-click the printer, and then select Printing Preferences.5. Select Print in Black only and Quick Print as the printing mode.6. Hit Apply then OK.
Question about Interpret S405 Wireless All-in-One InkJet Printer
...printing was stopped and it said printer will not print until the black ink cartridge is replaced...i refilled the black cartridge and its now full of ink, but it still showed the notification..... i ...
Question about Interpret S405 Wireless All-in-One InkJet Printer
...printer wont print in color i changed my ink cartridges. still the same problem. it is set to automatic. still wont print in color. the black works. replace print head. uninstall software and install ...
Question about Interpret S405 Wireless All-in-One InkJet Printer
...black but did change it. replace the new cartrige still show emty. dit firmware no luck. i do not see any chips on the cartrige but it know the volume of the ink. If you're using a ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions