...printer and keep the alignment page face down on the scanner glass and press scan button on the all-in-one. We need to scan the alignment page once the alignment page is printed to complete the ...
Question about Officejet 5610 All-In-One InkJet Printer
...for it...... I disconnect the power and when i power back up the printer is still trying to accomplish the scan endless problem Hello rondub, You can bypass the alignment process from the setup
printer and gone through the alignment process. It is printing the aligment pages fine. But everytime I try and print this alignment message comes up. The cartridges are in fine and I don't understand
...alignment page To align the cartridge from the control panel: Please follow the steps given below: 1. Please Load a plain paper. 2. Press and hold the "Scan" button for three seconds. 3. An alignment ...
...printer keeps saying push enter to align cartridges. i do that but it keeps saying that Yes but after align test page have you put on scanner glass and press the scan button to finish the align ...
Question about PSC 1350 All-In-One Thermal Printer
alignment page prints every time printer is turned on. HP1315 on Windows Vista Home Premium. Take the test page ( also called : alighnment page ) that always prints when you switch on the printer and ...
Question about PSC 1315 All-In-One InkJet Printer
printer aligns the print cartridge as well as testing/aligning the scanner. Note: Try to look at the top of the test page, it should have instructions to place it in the scanner. I hope that this will
Question about J3680 Officejet All In One Printer
...page not printed properly due clogged nozzles, printer unable to completes align successfully, remove both cartridges clean nozzles as shown in attached link, refix & try, even not ...
...printer and then on. After cartridge holder comes to the center install both the cartridges. Then it will print the Alignment page. After alignment page prints place the Alignment page on to the ...
...ALIGNMENT PAGE WONT SCAN MY DATA IS BLURRY. WHEN I TRY TO SCAN THE ALIGNMENT PAGE IT SAYS SCANNING. BUT IT SAYS THIS FOR HOURS! IT WONT SCAN THE ALIGNMENT PAGE Hello, If the data is blurry, then the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
