Questions & Answers for: Kodak port debug

Kodak 5500 kodak 5500 will not scan comes up with error code and says that JIT debugging must be enabled Try updating java and let me know. Also, go to add/remove programs and repair the MS .NEt ...

External hard drive problem With my easyshare 5300 connected to my pc, i have problems with my external hard drive (Maxtor 500 GB). It is not possible to save any work done on autocad files which are ...

Bad USB Port in Camera I was having problems transferring pictures from my DX7440 and could feel a little "glitch" with my cable/USB port in the camera, so thinking my cable was bad I ordered a new ...

charging camera i plug my camera into the usb port in my computer but how do i know if its charging right because theres no light flashing and i cant turn it on after its been plugged for a while Are ...

...pictures to computer the camera was purchased christmas 2007. It could be a bad USB cable or a bad port. You can test the port by plugging in a different device. If the port tests good and the

...a Firmware or Software Problem. For it you need to unplug the Printer from the PC and ask Kodak support for any available upgraded Softwares of Firmware. At last be sure that only one Port is

Can i charge my kodak M341 using usb port using a pc. Yes, if the computer puts enough juice into its USB port; not all computers do. If you have ports on both the front and back of your computer, try

...Select the 'Add printer Wizard', then click 'Add a local printer' and then click 'Create a new port'. Make sure that local port is there in the list and then click 'Next'. In the Port name

...kodak c195 easy share , Used to work fine when downloading pictures . Now everytime i Plug into USB port it shuts off . I have purchased new batteries and tried another usb cable . Still nothing . It ...

...can start a scan e73 is A USB command failure. Check to see if the scanner is connected to a USB 3 port. A USB 3 port can be identified by the port being Blue in color or have the letters "SS"