...projector and we too had just changed the lamp. I read somewhere while searching for an answer that if the cable input is loose it will cause double vision of the text. Sure enough, the cable was ...
...ProScreen 4750? Hi there There should be a lamp door at the bottom of the Projector that you have to unscrew before you will be able to take out the lamp. there is a door next to the input panel you ...
Philips Proscreen 4750 projector - when I turn it on the picture is extremely dark. I can see what is going on in the picture (meaning that connection with the source works well), but it is very dark,
fan not running Hi The fan has stopped running therefore overheats and cuts out.I am have dififculty getting into the projector what type of screws/fixings are in the base and is there a fuse for the ...
i have a lc4750 proscan philips projector. i keep seeing ghosting images. and the colors, are not centerd.. most likely the mirror has moved or a lense has come out of its groove.
Question about ProScreen 4600 Impact Multimedia Projector
...projector but do not have a manual or power cord. How do we get these? Internet. You can download an Owners Manual. For the power cord look online also or go to the store and buy one. Electronics ...
Question about ProScreen 4750 Impact Multimedia Projector
the projector does not operate the "lamp" led blinks in green and turn red after one minute. The switch on button does not replied. either it's overheated or needs a replacement bulb.Do not cover this
It keeps overheating. the project will be on for about five or ten minutes, then turns the lamp off and flashes the lamp button Is the fan set to run continuously? Go to the menu and see if it's set ...
Question about ProScreen 4750 Impact Multimedia Projector
old device right? It could be a fuse blown - check the manual for instructions if there are any. Could be a capacitor that gave way after 13 years - nothing to do about it except recycle the projector
convergence phillips proscreen green out of convergence The adjustment requires disassembling the projector. It's not really something that should be attempted in the field.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions