Questions & Answers for: Xerox pattern code

Question about DocuColor 12 Printer

1 Answer

...code 9-369 while developer unit comleted first action.Also while the front part is open the machine is not appear "close the open door" .Which card of machine is [email protected]. : The ...

Ad

Question about DocuColor 12 Printer

4 Answers

...code is due to busted fuse in the rotary pwb. Or could also be a fault with the fuses. Error 9-363 is the developer housing rotary system did not reach home position. Try to hard reset the machine ...

Ad

Question about WorkCentre 490CX All-In-One InkJet Printer

2 Answers

...code on it. The numbers are just under the UPC barcode. And example number looks like this: "15980300151P: 120, 172", so the example 400 dpi value here is "120".) 3. Press the ?Enter? key. 4. Perform ...

Question about DocuColor 12 Color Copier

2 Answers

Error-9-354 I am getting error 9-354 on my Xerox DC 12. The screen message is to turn off the machine & turn. I have restarted several times but to no avail. Please help. Hi, User Interface (UI) ...

Question about WorkCentre Pro 416 All-In-One Laser Printer

2 Answers

...code not cleat 08-400 then check these all thengs..1.Check the thermistors (1) Check if the connectors are disconnected.(2) Check if the main and edge thermistors are in contact with the surface ...

Question about DocuColor 12 Printer

1 Answer

...adjustments) ? Component Control (for testing sensors, motors, etc.) ? Print (for running Test Patterns from Diagnostics) ? Subsystem Check (for fuser nip measurement check out, and developer ...

Question about DocuColor 12 Printer

1 Answer

...Code: 389.601 · Description: RC Sample Block Fail-A1-In. During the A1 (fine adjustment pattern) and C patch detection, the patch at the MOB Sensor In side did . and more here ...

Question about Phaser 8560MFP Laser Printer

1 Answer

code pattern. 7. The VxWorks operating system is initialized and engine code is started. This takes about 15 seconds. The Xerox logo is displayed. 8. Print Engine Self Test (PEST) diagnostics are then

Question about Phaser 8560MFP Laser Printer

1 Answer

code pattern. 7. The VxWorks operating system is initialized and engine code is started. This takes about 15 seconds. The Xerox logo is displayed. 8. Print Engine Self Test (PEST) diagnostics are then

Question about Phaser 8560MFP Laser Printer

1 Answer

...pattern repeats and read what that code means. I have mine attached via a network cable so I can look at the CentreWare Information System webpage on my laptop. I then can click on the status button ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment and Supply Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...