Questions & Answers for: paper size printer driver ink

...the Paper/Quality tab. In the Size is drop-down menu, select the size of the paper loaded in the unit. In the Type is drop-down menu, select the type of paper loaded in the unit. Click OK . hp ...

...size and paper type, and that they match the driver settings. An example. See that the letter tray settings are 8 1/2 x11 plain paper on the machine and driver. Be for example that the driver doesnt ...

Paper Size Look at the chart below to verify that the paper size meets the 3000cn / 3010cn / 3100cn-series specifications. Verify the paper size in the tray matches the size set in the 3000cn / 3010cn

...width are entered there. In the zebra universal, click paper output and enter the size. Check to see if the Ribbon is installed correctly, if using in DT mode make sure the drives is setup

...driver then click printing defaults. In the ZDesigner driver height and width are entered there. In the zebra universal, its the same path but one extra click. Click paper output and enter the

...paper size and paper type settings are not an exact match. Press Enter on the control panel to clear the error message. Try the print job again. If these steps resolved the issue , you do not need to ...

...the paper size that matches the paper in the tray. From the Type is drop-down menu, select the paper type that matches the paper in the tray. Click OK , and then click OK again to print the

printer has ink cartridges, not ribbon.

Cleaning Jets:
After so long, the cartridge jets are probably dried out and blocked.
You will need:
Boiling hot water,
Shallow dish.
Paper

paper size setting in the printer driver does not match the paper actually loaded in the product, the product reports a 'Paper Mismatch' error. The message saves paper and ink by preventing print jobs

...size paper being used. If the operating system (Windows, etc.,) offers a "printer control panel", you can make these changes there instead as it is often easier to navigate on a large screen rather ...