...the issue. You can also check for any pieces of paper that might stuck somewhere by the paper tray. Check the paper path and see if there are any scraps of paper blocking the paper path of a
Question about Aficio CL7000 Laser Printer
...paper path and the sensors appear to be intact. Pull out paper cassett and look for paper in the feed section. Fold a sheet of paper in half and using the blue lever inside right side door feed paper ...
Question about Sidekick 1400 Path-Through Scanner
paper path error when path is clear & clean. Continue to get intermittent error saying paper still remains in the scanner. No obstructions present; have cleaned the senors & rollers repeatedly
...paper path. Reload the paper in the paper input tray; verify that there are no jams in the paper path, and press MENU/ENTER to continue the job. If the error persists, replace the printer pickup ...
...paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper operation. For message 3.0 PAPER JAM ...
...paper path. Check the paper path from the Automatic Sheet Feeder (ASF) side, raise the cover and visually check the paper path. Try running a thicker sheet of paper through the printer (card stock ...
...paper path error Thank you contacting FixYa for your printer inquiry. This error is associated with either a sheet of paper blocking the paper path or a partial piece of paper that blocks path or ...
Question about MX340 AllInOne InkJet Printer
...paper path. Firs, open ADF access cover and check if some broken paper present inside paper path. If no broken paper found in paper path means paper sensor is faulty and you need got new ADF ...
...to feed paper, paper never feeds, causing the paper path sensor to say "hey, that sheet of paper never reached me, so it must have jammed somewhere. Check the paper path for a paper or piece of
Question about MX340 AllInOne InkJet Printer
...it gives the same . check paper path rather than just the paper tray. Check duplexer and any other paths the paper takes There will be levers of some kind to open path of path through the printer
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions