Paper feeder problem The paper gets crumpled when it feeds in and prints crooked. nice gets that weathered look
...paper path. It is not too difficult to open the document feeder - just be careful in remembering what came from where :) The obstruction could also be a piece of paper that was torn while removing a ...
...crumpling the paper like that, the feeder is working fine, just something blocking the paper path. You can take a minela folder, and gently push it through the paper path to dislodge the
Question about Officejet Pro L7590 All-in-One InkJet Printer
paper get jammed in the automatic feeder on top of my printer When i go to load mulitiple pieces of paper in the paper feed on top of my HP Officejet Pro L7590, they get jammed. The papers actually ...
is still to keep a .5cm allowance. - There is something blocking the feeder which causes the paper to go out of track. Are you sure there isn't a crumpled paper or torn paper left with the feeder? HTH
the paper when pulling it from the feeder tray...Anything we can do to fix it? Have you check to see if any thing is lodged inside where the paper goes? Make sure it is free and clear of any obstacles
Question about PIXMA MP240 All-In-One InkJet Printer
when the paper feeds in, it just gets jammed and crumples the paper, even after i ran a feeder maintenance operation Try here LINK.
...for when this happens is to take a thick piece of card stock and manually feed it through the paper path on the doc feeder, this usually acts to unclog any jammed paper bits or debris.
paper will not feed Check to see that the paper isn't getting crumpled prior to entering the feeder.
Question about Pixma iP2702 PrinterCalculatorPaper
...trays. 5. The issue may also occur due to Feeder jams. Open the tray to lower the elevator in the base of the tray automatically. 6. Remove any crumpled paper from the tray and close the Feeder
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions