Questions & Answers for: optiquest q2201wb

vga cable for a optiquest (viewsconic lcd monitor i ahve a optiquest lcd monitor model #vs11201. the cable is broken and i need a new one. the end that connects to the motherboard in the monitor has 2

Optiquest V655 Monitor no power my Optiquest V655 Monitor no power pls help Have you tried another power cable? It could be a power supply problem. Too be honest, being a 15" crt monitor it would prob

I have a viewsonic optiquest monitor Q20WB and buttons not workin I have a viewsonic optiquest monitor Q20WB and the buttons do not work (power, menu and up and down). The on screen menu stays up and ...

been about to find the part number(s) anywhere. Can you help me? Thank you! Patty Look on eBay for "Optiquest Q19wb repair" or "Optiquest Q19wb power" This is a common failure mode. You can either buy

I have a Optiquest Monitor Q9. The Monitor had a cract line from top to the bottom in the middle of the screen, but it still working, I would like to find out if Optiquest would replace just the ...

...be the monitor optimum resolution: 1440x900 ...

barely used work fine and then no power nothing Optiquest 19" lcd You can take the unit apart, in there you will see the power supply, check the fuses(small) and check the caps to see if the tops are ...

ViewSonic Optiquest Q19wb LCD Monitor goes blank Viewsonic Optiquest Q19wb lcd Monitor goes blank after 2 secs. A couple of posts say replace the 1000uf 16v Cap My problem is i can't find them on the ...

I have an Optiquest Q19w monitor that just went black. Rebooting the computer gives me a "no signal". What gives? Make sure the VGA cable are on tight, try this monitor with another PC to ...

viewsonic optiquest flat panel lcd monitor power light flashes on and off with a popping niose Look for bad caps with bulging/leaking tops as shown here: ...