...Open up the ADF ****. Remove Two Silver screws holding front of top cover. Remove screw from ADF release button. Pull back of top cover to unclip. This will enable you to see the rear lamp bay and ...
Question about DR-5020 Path-Through Scanner
...a C01 error on my scanner. From what I can I have a C01 error on my scanner. From what I can see, no paper is stuck anywhere. C01 is 'Cover open'. Ensure that the top cover is closed fully. S. ...
...scanner section.Open the top cover and remove the scanner glass. Then you must remove the scanner section.Open it cover and carefully clean the ash from all mirrors.Then assembly everything and ...
... scanner cover is open, (-4429). Could you please help? -franr5360 When the top cover is open you get message C01, when the top portion of the top module is not in position, you get C02 error. S. ...
...under the scanner cover. When you open the cover on top the scanner glass is there, then you can open under that as well from the right side of the printer, there is a grove to open it up
Question about P6250 All-In-One InkJet Photo Printer
Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid. Open the top cover Using the carrier belt, move the cartridge carrier to the middle
Question about ScanMaker 5800 Flatbed Scanner
scanner : 1 Open up your scanner's lid. It does not matter if the scanner is on or off for this basic, regular cleaning. 2 Wipe down the glass surface with a dry, lint-free microfiber cloth. This will
...scanner on my printer. How do you do it? 1 Open the top cover 2 Place the original document or item face down on the scanner glass in the lower right corner 2 Close the top cover to avoid dark edges ...
...Open the top cover, and then load an original document face down on the scanner glass. 2. Close the top cover to avoid dark edges on the scanned image. 3. Make sure that the printer is connected to a ...
...scanner "home" 4) Open the right side cover - it has two screws that hold it in place 5) Switch on the printer 6) On start up, put the upper cover back on the scanner 7) Then ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
