Questions & Answers for: Canon PIXMA object

...you have to look real hard..It's possible that the paper may be running into a foreign object and not feeding in at all. A foreign object could also cause the paper to stall, or even

...behavior can occur because the Setup program is attempting to locate the Microsoft Exchange System Objects container, but cannot locate it. This behavior can occur because the objectclass attribute ...

Believe small object fallen into paper feed, advice on how to retrieve. Remove all paper and ink cartridges, turn the printer upside dawn and tap it until the object fall out. this works for me.

...), picture (picture: A file (such as a metafile) that you can ungroup and manipulate as two or more objects or a file that stays as a single object (such as bitmaps).), WordArt (WordArt: Text objects ...

...this be fixed? I have tried resetting the printer and turning it off and on again. There is some object who block paper in sheet feeder.Look inside sheet feeder using flashlight and try to find

when is printed just pull for right side and destroy the paper Hi, There seems to be a sticky object on the paper feed path, make sure there are no object in the path. Drum may be be getting too hot.

My paper had a paper jam because an object was stuck on it. After removing the object the printer still indicates E3 or paper jam. What do I do? clean it easy with cleaner and check it proper if cut ...

indicates theres no paper but there is paper this problem generally occurs when a foreign object falls into the load area of the printer and gets stuck in the paper load wheels.you can unplug the ...

...bends and jams in the printer, I think it is a mechanical problem. Check the paper path for foreign objects. It is very easy for common office objects to fall there. Also they are not vizible when ...

printer cartridge wont move to take out Look for objects that may be obstructing the path of the cartridge carrier and carefully remove those objects. You can also use a can of compressed air to flow ...