Questions & Answers for: mtd engine problems

mtd lawn mower with briggs engine,starter checks good,battery is new and checks good but when you try to start it the starter drags and blows a fuse Pull the starter and have it bench tested. If it is

Engine Pulley 660 MTD Yard Machines I have a 38" MTD Yard machines, Model: 13AM660F700 (2004). My deck belt keeps popping off while mowing and I noticed that the belt doesn't actually fit in the ...

...Engine to variable speed pulley). The new belt may be gripping the variable speed pulley more than the old belt. I think MTD recommends changing belts every one, or two years, so you do not have much ...

mtd snow blower,8hp 2 stage, 1995, Problem: oil leaking on axles, and on casing wear axle come out.wheel stop turning , no gear selection. could you direct me ??? The oil leak normaly would make the ...

...MTD at 800-800-7310 and with the model and serial and such off the engine - which are stamped into it - a nice lady was able to narrow down my tiller year. From there with horsepower details she ...

...engine on my mtd snow thrower will not start it is about 4 yrs old. it is full of new gas and I took the cover off so could see down carb and pressed primer 3-4 times no fuel sprayed into carb. had ...

I have craftsman Riding mower modle#917.289213 and want to mount a MTD 190-833c-OEM. Has somone out there ever run into this problem. I first purchased the riding mower, and the called Husqvarna and ...

...MTD edger has a fixed-speed carburator. My problem is that after starting (typically without any difficulty) the engine coughs and misses, and will die when put under load. I have disassembled it, ...

...MTD dl92T when in driving forward something is causing banging and is vibrating the forward revers lever.with the engine off and move the drive belt by hand you can replicate the problem sounds like ...

MTD walk behind leaf vacuum, would like to buy a new replacement engine, I do have photo if helps. The problem is the carburetor pin stop is faulty and it flood’s engine when at full stop I believe at