Questions & Answers for: Mercury lines

My tranny coolant line is leaking at the fitting. Is there a way to replace the fitting? The fitting is replaceable if you have a flaring kit, because you have to cut the line to replace it. Before ...

...you are not a mechanic OR you have NO IDEA about the vehicle in question since there are TWO fuel lines running from the sending unit at the tank to the feul rail on the engine..... only one of

putting on timing belt . 1997 mercury villager , putting on timing belt . lined up the white marks on belt with marks on cam shafts . but the crank marks did not line up with belt. The crank has got ...

A/C line from condensor to compressor is leaking. what is this line called? The line coming from the Compressor to the Condenser is called the Discharge Line or Hi Pressure Line. The line coming from ...

...line, u must replace the line to replace the tube, the high pressure line is the smaller of the two lines from the AC ...

Hi Good morning , iam trying to connect the audio cable to my front panel system , but it is not working , I have tried the colour code method , instant jack serial no method , still iam unable ...

...there, no caliper leaks, so OK. Rear needed new shoes. After taking wheels off, saw rear brake lines were rusted and leaking. I replaced the rear brake lines, rear brake shoes and rear driver ...

replace brake line Brakelines can be challenging to replace or quite easy. It just depends on which one you are asking about. Some of the brakelines are segmented and the ends have short runs. Others ...

...individual line is often difficult to ship. There are different size fittings on the ends of brake lines. In some cases, the Universal lines may work, but the end fittings must match your vehicle. ...

front brake lines routing front steel brake lines hi ,having troubled with rusted lines?best way to do it is getting a few pre-double flared segments of brake lines of different lenght,a couple union ...