20 Most Recent 2000 Mercury Sable Questions & Answers

Does it leak while driving or setting? If setting then let it set and when it leaks , find the source. Best to have a lift. Run it on the lift to see where the leak is if driving. Make sure it is not a line or the breather tube on top.

2000 Mercury... • Answered on May 09, 2019

Can not comment about the locked doors condition but sometimes a shorted battery will cause the alarm system to trip.

2000 Mercury... • Answered on Feb 19, 2018

if is a slow leak and you don't hear a load hissing is ok! replace any hose that you think needs replacement, on top of that check your radiator hoses for swelling ,if the car is leaking water each time you drive the car your risking the engine to blow a head gasket so I would fix the problem right away....

2000 Mercury... • Answered on Feb 04, 2018

Entry Code The system (permanent) entry code is located in three places:
  • on the owner's wallet code card (in glove compartment)
  • electronically accessible by requesting the remote anti-theft personality module KEYCODE PID on the New Generation Star (NGS) Tester 007-00500 or equivalent.
  • on the remote anti-theft personality module housing
The remote anti-theft personality module is programmed at the factory with a five-digit entry code. A replacement remote anti-theft personality module includes replacement labels and a new owner's code card. Remote Anti-theft Personality (RAP) Module C253 Above the drivers side footwell, directly above the accelerator pedal

2000 Mercury... • Answered on Nov 16, 2017

Check for problems with the Vehicle speed sensor on the transmission.

2000 Mercury... • Answered on Sep 28, 2017

Have you had exhaust system back pressure tested ? Plugged catalytic converter ?

2000 Mercury... • Answered on Sep 13, 2017

No quick fix. If you are lucky, it is just the flexplate snapped loose from the torque converter. There is usually a door that you take off to access the 4 bolts that hold the flex plate to the converter. Remove that door to see if the bolts have sheared off.

2000 Mercury... • Answered on Jun 22, 2017

All the components you mentioned have control modules that you have likely burned out from the reverse hook up of the battery.

2000 Mercury... • Answered on May 16, 2017

I believe that indicates a fault with the transmission.

2000 Mercury... • Answered on Feb 06, 2017

check fuses,relays,and inertia switch--start from back and work foward test pump -power no pump -pump bad replace--no power start following lines and connections back

2000 Mercury... • Answered on Dec 05, 2016

controls many things, also has relays. better question is fuse diagram for 2000 mercury sable

2000 Mercury... • Answered on Dec 01, 2016

Not finding what you are looking for?
2000 Mercury Sable Logo

975 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

14868 Answers

Greg Bernett
Greg Bernett

Level 3 Expert

2993 Answers


Level 3 Expert

4376 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sable Mercury

  • Sable Mercury

Most Popular Question

fuse alternator in 2000 murcury sable

  • Cars & Trucks