Questions & Answers for: lid catch

Ad

...lid catch there is a small plastic buttun that the roof lid catch needs to pres down on, this tells the car that the roof lid is seucre and it is now safe to let open the trunk, All you have to do is ...

Ad

Question about CD Player with Cassette Recorder, CD-2036 (Silver) Boombox

1 Answer

...LID LATCH FOR DURABRAND MOD. CD-1493 NEED CATCH TO HOLD CD DOOR CLOSED. BROKE AND FELL INTO SYSTEM. NEED THE FEMALE CATCH PART NOT THE CD DOOR MALE PART. ...

Ad

Question about CD Player with Cassette Recorder, CD-2036 (Silver) Boombox

2 Answers

...the machine. Tighten up the screws for the lid latch and the catch. If the switch is separate from the latch and catch assemblies, tighten this also. Plug it back in and try it. Best Regards,

...motor is not catching. Motor is not functioning. If the latch on the deck lid does not catch your problem is the latch catch. If it closes and does not pull down you will need a pull down

Question about Photosmart 3310 Printer

1 Answer

...catch that locks the lid up just release the catch. If yours does not have this check to make sure you don't have to lift up again to release the lid. These are the only problems with that type of ...

Question about DC07 Animal Bagless Upright Cyclonic Vacuum

1 Answer

catch which the lid clips into ) however the lid pops off the catch andboth the lid and filter below it ( and held down and in place by it ) comes loose causing no **** and a loud whilstling noise The

why does my gas tank lid keep popping open Sometimes the lid, where it catches the latch, will bend slightly causing it to not latch fully. You may try to see what catches and try to lightly bend it ...

Question about ThinkPad T410 Notebook

1 Answer

Lid to my lenovo does not close tightly I can shut the lid, but it does not catch and close firmly. Why? The catch maybe broken.

Question about 40870 Electric Kettle

1 Answer

lid apart to glue the small catch part of the mechanism. When I put it all back together, the catch worked fine, but now the auto-shutoff does not work. I used to observe this when the flipper lid was

...catch while gently lifting the lid on the side until it releases. Do the same to the other front catch until it releases. Now hang on to the hinged door lid while opening the whole lid towards the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...