Questions & Answers for: lcd projector turns immedially turning

...play something, it will play fine but then turn blue again after around 30-35 minutes. My bulb is on 1000 hours. bad Lcd's i guess get the projector looked at immediately before something worse ...

...LCD Projector Recently I replaced the bulb in this unit and now I continue to get a message at startup that the bulb needs replaced call a maintenance technician. After a few minutes the message ...

...off the entire rear cover of the tv. i have a 50 inch.. This is a link to AVS for Panny PT-50LC (LCD) which I assume must be the same for the DLP. With the TV powered off (make sure it's off for a ...

LCD projector. When I plug it in the Power led is orange, when I press the Standyby/on button the fan goes on, power led goes green then it immediately shuts down and the power led goes off. Any ideas

LCD projector not displaying image of the laptop I have a Dell Latitude C510/C610 that is fine but I hooked it up to an LCD projector and the LCD projector is not displaying an image. I need to know ...

...LCD Toshiba TLP-X3000 projector but project showing a red light and it is not turning on.Pls tell me solution immediately.... Soban you should try shutting down your laptop, plugging in the interface ...

will not turn on. power light is orange Many projectors will not turn on, or will turn on and immediately shut down, when the lamp needs replacing. How long has the projector been in use? Most lamps ...

...LCD projector. I connected the project via a porft connector, I believe that would normally be used for an external display. The PC did not immediately display on the projector so we were trying ...

...projector). If video does show on the external monitor, then open the LCD screen back up and see if any video shows there.3. If the video does not show on an external monitor at all, try the hot ...

...projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price. any questions, feel free to contact me have a nice ...