...Kitchenaid mixer and the slow speed always creeps up and it does not maintain a Speed 1/Stir speed. I've tried adjusting the speed plate and it won't slow down. Is it the fault of the governor,speed ...
...mixer may automatically void the 1 year warranty regardless of age. There are international Kitchenaid dealers available if you are requiring 110V. You may contacted Kitchenaid Customer Service for ...
kitchenaid artisan mixer Stir/2 speeds there is noise but no movement. Speeds 4,6,8 and 10 have the same speed. 2 small wire pieces fell out when cover was removed. Any help would be appreciated. The ...
...artisan mixer, and how to put it back together correctly. Here is a link to the service manual: http://lib.store.yahoo.net/lib/mendingshed/kitchenaidservicemanual.pdf Pay attention to pages 7 and 11 ...
Question about KSM150PS Artisan Series Stand Mixer
...kitchenaid mixer only works on high speed. My kitchenaid K45 mixer only works on high speed. What should I check to correct this so it will work with the slower speeds. Hiya, I am sorry to hear you ...
Question about KSM150PS Artisan Series Stand Mixer
artisan mixer will sometimes come on but I see sparks coming from inside the speed adjust lever and other times it will not run at all, help! Check the carbon brushes, under those black screws, one on
...Mixer starts then stops Check for broken wire under back cover. Check operation of switch contacts on black speed control plate. Check carbon brushed under black screw caps on the sides. The brushes ...
my mixer won't start Look for any broken wires on the speed control plate under the back cover. Check the carbon brushes under the side caps. Brushes only go in one way so be careful.
Question about KSM150PS Artisan Series Stand Mixer
...kitchenAid artisan mixer How do remove the main cover Remove back cap, remove white wire and black wire from lower corner of speed control plate, both on same side on adjacent terminals. Remove the ...
Question about Artisan Series Tilt-Head Stand Mixer
KitchenAid Artisan mixer accessory port not turning I have an Artisan mixer. The mixer function works fine, even under load. The accessory port doesn't turn at all. I assume that a gear has failed. ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions