...in to make coffee is actually pushing the hot water in the tank out. So, if you don't fill the tank before using it, you may be hurting the heating element since it isn't totally submerged in
you can maybe brew 2 pots one after the other but then you need to give it time to recover. When you pour hot water in it pushes hot water from the holding tank out the spray head...hope that helps :
hot water always ready to make another pot. Pour water in ( at least 4 cups)then turn it on with the pot installed to catch the water. It takes a few minutes to get it hot . You might hear it heating.
...water hot in the tank, thus providing hot water when you need to make coffee. You then just pour the cold water in the top, shut the lid, and have a pot of coffee in 3 minutes. The On/Off switch is a ...
Question about BX HOME BREWER 10-Cup Coffee Maker
...20 minutes, then put your filter and coffee grounds in the funnel, pour a pot of water into the machine, put the pot on the warmer, and let the water run through. Then enjoy a nice hot cup of
...water all poured in and the pot on the warmer, causing a mess. This is common with bunn coffee makers, if you are not fast enough, coffee starts dripping. The only solution I found is to use a water ...
...flows from the basket and only then is it safe to plug in the brewer. The reservoir holds HOT water until you are ready to brew and then, by pouring in a pot of cold water, you will be able to
hot water will not come down thru coffee water is put in reservoir and it get hot but not release and come down thru coffee Your pour over coffee brewer has a reservoir that holds more than a pot of ...
Question about A10 Coffee Maker
...up the reserve tank so you always have hot water instantly, but to get that water you need to pour in another pot of water to replace it. ...
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
572 Questions
453 Questions